How to make soap from dogs? - briefly
Creating soap from dog fat involves rendering the fat into tallow, then mixing it with lye and water to create a basic soap solution. After cooking and curing, you will have a usable product.
How to make soap from dogs? - in detail
Making soap from dog fat is an ancient practice that has been utilized for centuries due to its unique properties and benefits. This process involves rendering dog fat, mixing it with lye (sodium hydroxide), and then adding essential oils or fragrances for scent. Here's a step-by-step guide on how to make soap from dogs:
-
Rendering Dog Fat: The first step is to collect and render the dog fat. This can be done by saving the fat from cooked meat or asking a butcher for it. Place the fat in a large pot, cover it with water, and slowly heat it on low to medium temperature. Stir occasionally until all the fat has melted and separated from any remaining solids. Allow the mixture to cool slightly so that the fat solidifies at the top. Skim off the solidified fat and discard the liquid underneath.
-
Preparing the Lye Solution: Lye is necessary for saponification, which is the chemical reaction that turns fat into soap. Wear protective gloves and goggles when handling lye, as it can cause severe burns. Mix the lye with water in a well-ventilated area, ensuring the mixture does not get too hot (around 100°F or 38°C is ideal). Let the solution cool to room temperature before using it.
-
Mixing the Fat and Lye: Melt the rendered dog fat until it reaches a liquid consistency. Slowly pour the lye solution into the melted fat, stirring continuously with an immersion blender or a whisk. Continue mixing until the soap reaches "trace," which is when the mixture thickens to the point where drizzling some of it on top will leave a visible trace.
-
Adding Essential Oils: Once the soap has reached trace, you can add essential oils or fragrances for scent and additional benefits. Common choices include lavender, peppermint, tea tree oil, or any other preferred scent. Mix well to ensure the oils are evenly distributed throughout the soap.
-
Pouring into Molds: Pour the soap mixture into molds of your choice. You can use silicone molds, plastic containers, or even a simple cardboard box lined with wax paper. Allow the soap to harden undisturbed for at least 24 hours.
-
Cutting and Curing: After 24 hours, carefully remove the soap from the molds. If you used a large container, cut the soap into bars of your desired size. Place the bars on a rack or tray in a cool, dry place with good air circulation. Allow them to cure for at least 4-6 weeks. This process helps to harden the soap and improve its longevity.
-
Using Your Soap: Once fully cured, your dog fat soap is ready for use. It can be used as a regular bar of soap, providing gentle cleansing properties and a unique scent that some find appealing.
Remember, working with lye requires caution and careful handling to avoid injuries. Always follow safety guidelines when making soap at home.